Cleaning a toilet siphon jet can be a daunting task, especially if you’re not sure where to start. This article will provide you with a step-by-step guide on how to clean your toilet siphon jet in the most efficient way possible.
Cleaning the Toilet Siphon Jet may sound like a straightforward task, but the reality is a bit different. There are a few things that one must keep in mind; otherwise, the whole process can be quite overwhelming. But worry not; we are here to help you out!
The most important thing to remember is that you should always use gloves when cleaning the toilet siphon jet. This is because the jet is located near the sewer, and thus, there is a high risk of coming in contact with harmful bacteria and other germs.
Start With Safety
Before you start the cleaning process, you will need to ensure that you have all the necessary supplies. This includes gloves, rags, a small brush, and a cleaner specifically designed for toilet siphons.
Gloves are the most important because, as we mentioned before, the toilet siphon is located near the sewer. This means that there is a high possibility of coming in contact with harmful bacteria and other germs.
Rags will be used to wipe down the area after you have finished cleaning. A small brush will be used to scrub away any dirt or grime that has built up on the siphon.
And finally, a cleaner specifically designed for toilet siphons is important because it will be strong enough to break down any build-up without damaging the jet itself.
How to Clean a Toilet Siphon Jet – (The Right Way)
Now that you have all the necessary supplies, it’s time to start cleaning!
Step 1: Close the Water Supply Valve
The first step is to close the water supply valve. This will help stop the incoming water and make the cleaning process easy and mess-free. If you don’t close the water supply valve or it is leaking, the whole area will be filled with water, and it will be quite difficult to clean.
Step 2: Remove the Lid of the Toilet Tank
The next step is to remove the lid of the toilet tank. Once you have removed the lid, flush the toilet to drain all the water. This will make it easier for you to access the siphon jet.
Removing the lid thoroughly is also recommended to avoid any accidents during the whole cleaning process.
Step 3: Conduct a Toilet Jet Audit
Once the lid is removed, the next step is to conduct a thorough audit of the jet. This is the part where you will inspect every corner of the jet and see where the dirt and grime have built up.
Make sure to use a flashlight during this step so that you can clearly see everything. If you find any build-up, make a note of it so you can focus on those areas when cleaning.
Step 4: Seal The Jets Completely
After completing the inspection and starting the cleaning process, you will need to completely close all the jets. Make sure there is no leakage and all the holes in the rim of the Toilet seat are covered.
The reason for this is to allow the jet cleaning agent to stay there for a while and let it work on the build-up.
Step 5: Apply the Jet Cleaning Agent (Vinegar and Soda)
Now it’s time to apply the jet cleaning agent. Make sure to follow the instructions on the back of the bottle so that you can apply it correctly. Once you have applied it, let it sit for at least 30 minutes so that it can break down the build-up.
If you want to use a natural jet cleaning agent, you can mix equal parts of vinegar and baking soda. This mixture is just as effective as any store-bought cleaner and is also much safer to use.
Step 6: Scrub the Jets with a Small Brush
After letting the jet cleaning agent sit for at least 30 minutes, it’s time to scrub the jets with a small brush. Make sure to focus on the areas where you found the build-up during the audit.
If you are using a natural jet cleaning agent (vinegar and baking soda), make sure to rinse the jets well after scrubbing. This is because the acid in the vinegar can damage the jets if it is left for too long.
Step 7: Turn on the Water Supply Valve and Flush the Toilet
Once you have finished scrubbing, turn on the water supply valve and flush the toilet. This will help in rinsing away any leftover dirt or grime.
After flushing, check to see if the jets are still clogged. If they are, repeat steps 5 to 7 until the jets are completely clean. This will allow you to clean the toilet siphon jet the right way!
Why Do Toilet Jets Clog?
Now that you know how to clean a toilet siphon jet, it’s time to learn why they clog in the first place.
There are many reasons why toilet jets clog, but the most common is the minerals in the water. These minerals can build up over time and cause the jets to become clogged.
Another reason why toilet jets clog is because of objects that have been flushed down the toilet. These objects can get stuck in the jets and cause a blockage.
If you want to prevent your toilet jets from becoming clogged, it’s important to clean them regularly. This will help in removing any build-up before it has a chance to cause a blockage.
It’s also important to avoid flushing anything down the toilet that doesn’t belong there. This includes things like paper towels, sanitary napkins, and cotton balls.
Last Minute Thoughts
Now that you know how to clean a toilet siphon jet, it’s important to understand why they clog in the first place. The most common reason is the stacking up of the minerals in the water, which can build up over time and cause a blockage.
Another reason is the flushing of different objects down the toilet, like paper towels, sanitary napkins, and cotton balls.
If you want to prevent your toilet jets from becoming clogged, it’s important to regularly clean them and avoid flushing anything down the toilet that doesn’t belong there.
Thanks for reading!